Determination of sodium azide in beverages by ion chromatography

A convenient method for determination of sodium azide in beverages using ion chromatography is described. This method combines the specificity for azide with a simple sample preparation using a bubble and trap apparatus that removes any interferences. Sodium azide in a sample was acidified, and the azide was converted to the volatile hydrazoic acid, which was trapped in 2.5 mM sodium hydroxide solution. Determination was performed by isocratic ion chromatography using suppressed conductivity detection. Calibration curves were linear for 0.5 to 20 microg/mL sodium azide and the detection limit was 0.05 microg/mL. Recoveries of sodium azide from spiked samples (10.0 microg/g) were more than 82.6%. The method was then used to analyze various beverages.     

Hydrogen-bonded networks in organic conductors: crystal structures and electronic properties of charge-transfer salts of tetracyanoquinodimethane with 4,4'-biimidazolium having multiprotonated States

[structure: see text] Novel hydrogen-bonded charge-transfer salts of TCNQ with mono- and diprotonated 4,4'-biimidazolium were synthesized in order to demonstrate the high potential of the 4,4'-biimidazole system in a molecular conductor from the viewpoint of crystal engineering and electronic modulation. Crystal structure analyses of neutral 4,4'-biimidazole and TCNQ salts revealed the formation of two types of hydrogen-bonding modes of the 4,4'-biimidazole moiety depending on the protonated states. Neutral 4,4'-biimidazole possessed a linear chain mode of hydrogen-bonding to construct two-dimensional network. In the TCNQ salt of monoprotonated 4,4'-biimidazolium, the 4,4'-biimidazole moiety formed a dimer by a complementary mode of hydrogen-bonding. In contrast, the salt of diprotonated 4,4'-biimidazolium showed a double linear chain mode of hydrogen-bonding to construct a three-dimensional network. The formation of two types of hydrogen-bonding modes made the difference in the stacking patterns of TCNQ columns and in their transport properties. The TCNQ salt of diprotonated 4,4'-biimidazolium exhibited high electrical conductivity (sigma(rt) = 1.1 x 10(-1) S cm(-1)).     

Chemical release control: Schiff bases of vinylbenzaldehyde and functional amines

Schiff base (SB) monomers of vinylbenzaldehyde with functional amines were prepared. Copolymers of SB monomers with N-vinyl-2-pyrrolidone soluble in aqueous solutions were obtained in most cases. However, p-aminobenzenesulfonamide monomer resulted in gel formation. Thus, the reaction of vinylbenzaldehyde copolymer with the sulfonamide was used instead of the copolymerization. The hydrolytic behaviors of SB monomers and copolymers to liberate respective amines were structure dependent and, for most copolymers, the rates were lower than those of the corresponding monomers.     

Synthesis of 21-nor-22-oxa-1α,25-dihydroxyvitamin D3 derivatives in quest of a drug with low calcemic activity

Two 21-nor-22-oxa-1α,25-dihydroxyvitamin D₃ derivatives have been synthesized in quest of a drug with lower calcemic activity than Maxacalcitol, 22-oxa-1α,25-dihydroxyvitamin D₃, being used as antihyperparathyroidism and antipsoriatic drug. Of two 21-nor products obtained, the product carrying one carbon elongated side chain with diethylcarbinol moiety has been found to exhibit comparable differentiation-inducing activity to Maxacalcitol with much lower exhibition of calcemic activity.     

Surprising 1,7-cyclization of vinyl carbonyl ylides generated from reaction of indanetrione with vinyl diazo compounds

Reactions of tricarbonyl compounds with vinyl diazo compounds 2 were carried out. Reaction of 1,2,3-indanetrione with 2a,b,c gave the spiroindan-1,3-dione-2,2′-benzodihydrooxepin 7a,b,c, but not normal products oxirane and dihydrofuran derivatives expected from intermediate vinyl carbonyl ylides 4. Formation of 7 requires isomerization of vinyl carbonyl ylides 4 bearing a (Z)-cyanostyryl group to unstable (E)-form 5 and subsequent cyclization to oxepin 6 followed by a 1,5-hydrogen shift. However, reaction of 2 with six-membered cyclic tricarbonyl compounds 1,2,3-trioxo-2,3-dihydrophenalene 11 and dimethylalloxane 13 gave the dioxole 12 and the dihydrofuran 14, respectively, typical products expected from vinyl carbonyl ylides.     

Water enables direct use of allyl alcohol for Tsuji-Trost reaction without activators

[reaction: see text] An aqueous biphasic reaction system enables the direct use of allyl alcohol in the Tsuji-Trost reaction without the help of any activating reagents for allyl alcohol. The reaction conditions are neutral to basic, allowing the use of amines as the nucleophile. Theoretical calculations have elucidated the importance of hydration of the hydroxy group for the smooth generation of pi-allylpalladium species.     

Evaluation of homogeneity of binary blends of poly(3-hydroxybutyrate) and poly(L-lactic acid) studied by near infrared chemical imaging (NIRCI).

The homogeneity of blends of poly((R)-3-hydroxybutyrate) (PHB) and poly(L-lactic acid) (PLLA) was evaluated by the near infrared chemical imaging (NIRCI) technique. NIRCI can nondestructively investigate a sample over a wide field of view within a few minutes to acquire a large number of spatially resolved NIR spectral data. NIRCI may be combined with multivariate analysis not only for qualitative analysis but also for statistically based quantitative analysis. The score images derived from the partial least squares regression (PLSR) analysis directly show that PHB/PLLA blends are highly homogeneous. The standard deviations (STD) of the histograms, indicating the distribution of the score values, show small values for the blends. These results qualitatively and quantitatively show the high level of homogeneity of PHB/PLLA blends. The predictions of the spatially averaged concentrations of the blend components obtained from PLSR results show values similar to the actual contents for the blends. The small errors of the predictions are also explained by STD values.     

Novel trichothecanes, paecilomycine A, B, and C, isolated from entomopathogenic fungus, Paecilomyces tenuipes

Paecilomycine A (1), B (2), and C (3) were isolated from cultivated fruiting bodies of Paecilomyces tenuipes (Isaria japonica), which is a popular entomopathogenic fungus used in folk medicine and health foods in China, Korea, and Japan. The structures of 1-3 were deduced from their spectroscopic data and their absolute configurations were elucidated by preparing their MPA esters. Compound 1 showed activity in the neurotrophic factor biosynthesis in glial cells.     

Electrodeposition of manganese and molybdenum mixed oxide thin films and their charge storage properties

Manganese and molybdenum mixed oxides in a thin film form were deposited anodically on a platinum substrate by cycling the electrode potential between 0 and +1.0 V vs Ag/AgCl in aqueous manganese(II) solutions containing molybdate anion (MoO(4)2-). A possible mechanism for the film formation is as follows. First, electrooxidation of Mn2+ ions with H2O yields Mn oxide and protons. Then, the protons being accumulated near the electrode surface react with MoO(4)2- to form polyoxomolybdate through a dehydrated condensation reaction (by protonation and dehydration). The condensed product coprecipitates with the Mn oxide. Cyclic voltammetry of the Mn/Mo oxide film-coated electrode in aqueous 0.5 M Na2SO4 solution exhibited a pseudocapacitive behavior with higher capacitance and better rate capability than that of the pure Mn oxide prepared similarly, most likely as a result of an increase in electrical conductivity of the film. Electrochemical quartz crystal microbalance and X-ray photoelectron spectroscopy clearly demonstrated that the observed pseudocapacitive behavior results from reversible extraction/insertion of hydrated protons to balance the charge upon oxidation/reduction of Mn3+/Mn4+ in the film.     

Mechanism of gold adsorption by persimmon tannin gel.

Gold adsorption by persimmon tannin (PT) gel from a solution containing hydrogen tetrachloroaurate(III) was examined. A flow-rate examination in a column system indicated the reduction of Au(III) ion to Au(0). XRD patterns clarified the existence of Au(0) on the gel which adsorbed gold. The gel could also adsorb colloidal Au(0) prepared independently. A model consisting of ligand exchange, Au(III) reduction to Au(0), and resulting Au(0) adsorption by PT gel was presented for the gold adsorption mechanism.